HOW TO USE - Video at the bottom
⚠️ PLEASE read the directions fully before loading your first magazine ⚠️
⚠️Loaders are made for specific magazines. If loader doesn't fit please check model compatibility⚠️
Sometimes it can take a couple magazines of loading to get the hang of it! If you have any questions please reach out!
-
Step 1.
Load the first round normally by hand.
-
Step 2.
Place the loader on the magazine with the opening facing towards the front of the round.
-
Step 3.
Push the loader all the way down so there is enough clearance to insert the next round.
-
⚠️ Step 3. CONTINUED
If the magazine plunger ramps in the front, apply light pressure to the front with the next round or your finger.
-
⚠️ Step 3. CONTINUED
If the plunger ramps and no pressure is applied to the front, it is possible to dislodge the plunger.
-
Step 4.
Once pressed down, insert the round until it hits the back of the magazine. Hold the round in place with the pointer finger and thumb.
-
Step 5.
While holding the round in place, lift the loader all the way up until it clears the top of the round.
-
Step 6.
Push the round all the way to the back of the magazine!
-
Step 7.
Round has now been loaded!
-
Repeat step 3-6 until the magazine is fully loaded!
Tricks to aid loading!
-
Magazine binding when near capacity
Sometimes, when the magazine is near capacity, the round won't want to settle in the magazine.
-
This can be solved by pushing the loader down quickly and firmly. The rapid movement helps the rounds fall into place.
-
Please reach out if you have any questions!
We stand by our products and are eager to help you if needed! Customer satisfaction is our #1 priority!
How to use video.
Video is slower than normal use for demonstration purposes.
